(12″ × 24″ Precision Surface Grinder)
Chevalier Machinery Inc. FSG-3A1224 is one of the most common mid-size manual/automatic surface grinders found in toolrooms and precision shops. Known for rigidity and consistent flatness control, its performance ultimately depends on spindle stability, preload integrity, and contamination control.
Atlanta Precision Spindles rebuilds the spindle assembly only, restoring smooth rotation, proper preload, balance, and predictable thermal behavior.
FSG-3A1224 Overview
Typical Specs (model-dependent):
- Approx. 12″ × 24″ table capacity
- Belt-driven mechanical spindle head
- Grease-lubricated super-precision angular contact bearings
- Moderate RPM optimized for surface finish stability
This platform prioritizes rigidity and smoothness over extreme RPM.
Common FSG-3A1224 Spindle Issues
1️⃣ Abrasive Dust Contamination
Surface grinding generates fine, aggressive dust that can:
- Degrade grease
- Pit raceways
- Increase internal friction
- Shorten bearing life
Seal condition is critical.
2️⃣ Thermal Drift During Long Cycles
If preload shifts or grease degrades:
- Temperature rises gradually
- Flatness varies during extended runs
- Surface waviness appears
Thermal instability often shows before loud noise.
3️⃣ Wheel Imbalance
Improperly balanced wheels can:
- Increase radial load
- Amplify vibration
- Reduce finish quality
- Accelerate bearing fatigue
Wheel balance directly affects spindle longevity.
4️⃣ Bearing Fatigue
Continuous duty leads to:
- Radial play
- High-frequency vibration
- Audible rumble
- Measurable runout
Gradual degradation is common in high-hour machines.
Warning Signs Your FSG-3A1224 Spindle Needs Service
- Spindle running hotter than baseline
- Surface finish waviness
- Inconsistent flatness
- Audible bearing noise
- Runout measurable at wheel hub
- Increasing vibration over time
Early repair typically prevents shaft or housing damage.
Our FSG-3A1224 Spindle Rebuild Process
We focus on restoring smooth rotation and thermal predictability.
Our rebuild process includes:
- Complete spindle disassembly
- Bearing designation verification
- Matched super-precision bearing replacement
- Controlled preload assembly
- Seal inspection & contamination mitigation
- Shaft and housing inspection
- Dynamic balance correction
- Thermal stabilization testing
The objective: stable temperature rise and consistent grinding finish.
Repair vs Replacement
Replacing the spindle assembly can involve:
- Higher cost
- Production downtime
- Recalibration
A precision rebuild is often appropriate when:
- Housing tolerances are intact
- Failure is bearing-related
- Structural damage is limited
Rebuilding restores performance without replacing the full assembly.
Atlanta Precision Spindles repairs the spindle assembly only — not the Chevalier grinder machine.
Restore Flatness & Finish Quality
If your FSG-3A1224 is running hot, drifting dimensionally, or producing inconsistent surface finish, early evaluation can prevent further internal damage and reduce downtime.
Contact Atlanta Precision Spindles to discuss your FSG-3A1224 spindle condition and operating symptoms.